Ethernet Switch – SICOM 3024P

  • :China
  • :12 month

SICOM3024P is a layer 2 managed industrial Ethernet switch designed to operate reliably in electrically harsh and climatically demanding utility substation and industrial environments. SICOM3024P supports up to 4 gigabit fiber/copper ports and 24 fast Ethernet fiber/copper ports, meets the IEC61850 and IEEE1613 standards and approved by KEMA. SICOM3024P is a 19-inch 1U rack mountable device and its internal modular design offers the maximum flexibility for easy expansion.SICOM3024P supports many Layer 2 software features such as port, VLAN, multicast, QoS, fast redundant ring. It supports Console, Telnet, Web management and network management software based on SNMP. At present, the product is widely used at the intelligent substation and many other industrial communication systems.

Product details

Supports max 4 gigabit fiber/copper ports and 24 fast Ethernet fiber/copper ports
Internal modular design for easy expansion
Supports DT-Ring ,DRP, RSTP for network redundancy
Supports IEC61850 MMS management(special firmware)
Supports alarm and syslog upload
Complies with IEC61850-3 and IEEE1613
KEMA, CE, FCC, UL, NEMA TS2

Software Functions
Switching Function Supports VLAN and PVLAN
Supports GVRP
Supports port aggregation
Supports flow control
Supports port rate limit
Supports broadcast storm suppression
Supports static ARP
Supports ARP aging time
Supports static MAC address
Supports MAC aging time
Supports MAC learning setting
Redundancy Protocol Supports DHP and DRP and the recovery time<20 ms
Supports DT-Ring, DT-Ring+, and DT-VLAN and the recovery time<50 ms
Supports STP/RSTP
Multicast Protocol Supports IGMP snooping,query and IGMP cross
Supports GMRP
Supports static multicast
Security Supports IEEE 802.1x、
Supports HTTPs/SSL
Supports SSH
Supports RADIUS
Supports TACACS+
Supports user grading
Supports user login timeout
Supports enhanced password
Supports port isolate
Supports MAC learing limit
Supports remote access serurity
Service Quality Management Supports ACL
Supports 802.1p(CoS),DSCP
Supports SP and WRR queuing
Management & Maintenance Supports Console, Telnet, and Web management
Supports SNMPv1/v2c/v3 and can managed by Kyvision
Supports IEC61850 MMS server
Supports software update via FTP
Supports configuration upload/download via FTP/HTTP
Supports the IP/MAC address conflict alarm, power failure alarm, power alarm, temperature alarm, port alarm, port flow alarm,CPU/memory usage alarm,login/logout alarm,config change alarm,and ring alarm
Supports RMON
Supports port mirroring
Supports Syslog,save to flash or send to log server
Supports LLDP
Supports Link-check
IP Address Management Supports DHCP server/client/snooping/option 82
Clock Management Supports SNTP server/client
Supports RTC
Supports time zone and daylight saving time
Product Specifications
Standard IEEE 802.3i(10Base-T)
IEEE 802.3u(100Base-TX and 100Base-FX)
IEEE 802.3ab(1000Base-T)
IEEE 802.3z(1000Base-SX/LX)
IEEE 802.3ad (port aggregation)
IEEE 802.3x(flow control)
IEEE 802.1p(priority)
IEEE 802.1Q(VLAN)
IEEE 802.1w(RSTP)
Switch Properties Priority queue: 4
Number of VLANs: 256
VLAN ID: 1–4093
Number of multicast groups: 256
MAC table: 8K
Packet buffer: 4Mbit
Packet forwarding rate: 9.5Mpps
Switching delay:<10μs
Interface Gigabit ports:
1000Base-X, SFP port
10/100/1000Base-T(X), RJ45 port
Fast Ethernet ports:
100Base-FX, single/multi mode, SC/ST/FC connector
100Base-FX, SFP port(LC connector)
10/100Base-T(X), RJ45 port
Console port: RS232,RJ45
Alarm contact: 3-pin 5.08mm-spacing plug-in terminal block, 250 VAC/220 VDC Max, 2 A Max, 60 W Max
LED LED on front panel
Running LED: Run
Alarm LED: Alarm
Power LED: PWR1, PWR2
Port LED: Link/ACT
Port speed LED: Speed
LED on rear panel
Port LED: Link/ACT
Port speed LED: Speed
Power Requirements Power input:
24VDC(18-36VDC),
48VDC(36-72VDC),
100-240VAC,50/60Hz;110-220VDC (85-264VAC/77-300VDC)
Power terminal: 5-pin 5.08 mm-spacing plug-in terminal block
Power consumption:<35w
Overload protection: Support
Reverse connection protection: Support
Redundancy protection: Support
Physical Characteristics Housing: Metal
Cooling: Natural cooling, fanless
Protection Class: IP40
Dimensions(WxHxD): 482.6mm×44mm×322.5mm
Weight: 4Kg
Mounting: 19 inch 1U rack mounting
Environmental Limits Operating temperature: -40°C to +85°C
Storage temperature: -40°C to +85°C
Ambient Relative Humidity: 5% - 95% (non-condensing)
Quality Assurance MTBF: 502802 hrs
Warranty: 5 years
Approvals KEMA: Models with power supply of HV:100-240VAC,50/60Hz;110-220VDC
CE: Models with power supply of HV:100-240VAC,50/60Hz;110-220VDC
FCC: Models with power supply of HV:100-240VAC,50/60Hz;110-220VDC
UL508,Class I,Div2: All models
NEMA TS2: Models with power supply of HV:100-240VAC,50/60Hz;110-220VDC
IEC 60950-1, EN 60950-1
Industry Standard EMI:
FCC CFR47 Part 15,EN55022/CISPR22,Class A
EMS:
IEC61000-4-2(ESD) ±8kV(contact),±15kV(air)
IEC61000-4-3(RS) 10V/m(80MHz-2GHz)
IEC61000-4-4(EFT) Power Port:±4kV;Data Port:±2kV
IEC61000-4-5(Surge) Power Port:±2kV/DM,±4kV/CM;Data Port:±2kV
IEC61000-4-6(CS) 3V(10kHz-150kHz);10V(150kHz-80MHz)
IEC61000-4-8(power frequency magnetic field) 100A/m(cont.),1000A/m(1s-3s)
IEC61000-4-9(pulsed magnetic field) 1000A/m
IEC61000-4-10(damped oscillation) 100A/m
IEC61000-4-12(oscillatory wave) 2.5kV/CM,1kV/DM
IEC61000-4-16(common mode conduction) 30V(cont.),300V(1s)
Machinery:
IEC60068-2-6 (vibration)
IEC60068-2-27 (shock)
IEC60068-2-32 (free fall)
Climatic environmental:
IEC60068-2-1 Cold test
IEC60068-2-2 Dry heat test
IEC60068-2-14 Change of temperature test
IEC60068-2-30 Damp heat cyclic test
IEC60068-2-78 Damp heat steady state test
Other products !