PTS-10 is a modular-designed multifunction time server. PTS-10 is designed for 1U 19 inch rack mounting requirements. It provides nanosecond accuracy time service for any industry fields. It supports GPS (Global Positioning Service), BDS (Chinese Satellite System), and GLONASS (Russian Satellite System) as sky time sources and PTP (Precision Timing Protocol), IRIG-B as ground time sources. Based on the multiple time source input PTS-10 has multi-time source selection logical and Sky-Grounding time backup function inside. It also supports PTP (Precision Timing Protocol), NTP (Network Time Protocol), IRIG-B, 1PPS, 1PPM, 1PPH and TOD etc. time synchronization signal output as time synchronization purpose. PTS-10 supports TMS (Time Management System) features to report PTS-10 time status by IEC 61850, IEC 60870-5-104, SNMP, Modbus TCP, DNP over TCP etc. It also can generate accurate GOOSE signal to trigger an event to monitor IED time status in power system and provides GOOSE subscriber to send time status by IEC 61850 MMS. It has been widely deployed in power, industrial automation, health care and other industries.
| Product Specifications | |
| Satellite Receiver and Antenna | Receiving Sensitivity of Receiver Locking Sensitivity<-160dBm Tracking Sensitivity<-167dBm Locking Time <0.5min (Warm Boot), <10min (Cold Boot) Time Accuracy of Receiver Better than 20ns (1pps, relative to UTC) Receiving Antenna Sensitivity ≤-163dBm |
| Time Accuracy | 1PPS Fiber≤60ns TTL≤60ns RS485≤0.5µs Contact≤3µs IRIG-B Fiber≤60ns TTL≤60ns RS485≤0.5µs Modulated≤3µs Serial Data RS232≤5ms RS485≤5ms NTP ≤50µs PTP ≤50ns |
| LED | PSW ON: Power ON; OFF: Power OFF SAT ON: Satellite number≥4; OFF: Satellite number<4 ANT ON: Antenna status is normal; OFF: Antenna status is abnormal LOCK Flash per second: Clock is locked Flash per 3 seconds: Clock is hold OFF: Clock is unlocked |
| Key | UP Move the cursor up DOWN Move the cursor down ENTER Confirm operation ESC Cancel operation |
| Holdover Accuracy | TCXO 55μs per hour OCXO 6μs per 24h |
| Input Interface | Satellite SAT1: BNC connector (3.3-5VDC) Fiber FI1: ST-850nm MM (IRIG-B-DC) FI2: ST-850nm MM (IRIG-B-DC) |
| Network Interface | Ethernet 2╳10/100Base-TX RJ45 ports or 2╳1000Base-X SFP slot, 10/100/1000Base-T(X) Combo ports |
| Output Interface | TTL (Terminal) Terminal connector, 1PPS/1PPM/1PPH or IRIG-B TTL (BNC) BNC connector, 1PPS/1PPM/1PPH or IRIG-B Fiber ST multimode connector, 1PPS/1PPM/1PPH or IRIG-B Serial Data (Terminal) RS232, 1PPS/1PPM/1PPH or serial time signal RS485, 1PPS/1PPM/1PPH, IRIG-B or serial time signal Serial Data (DB9) DB9 connector, 1PPS/1PPM/1PPH, IRIG-B or serial time signal IRIG-B Modulated (Terminal) Terminal connector, IRIG-B modulated signal IRIG-B Modulated (BNC) BNC connector, IRIG-B modulated signal Contact (Terminal) Terminal connector, 1PPS/1PPM/1PPH or IRIG-B |
| Power Supply | Power Input 85-264VAC/DC, single power input Power Terminal 5-pin 5.08 mm-spacing plug-in terminal block Power Alarm Support Status Alarm Support |
| Physical Characteristics | Housing Metal Cooling Natural cooling, fanless Protection Class IP40 Dimensions(WxHxD) 483 ╳ 45 ╳ 280mm Weight 4.5kg Mounting 1U 19 inch rack mounting |
| Environmental Limits | Operating temperature -20℃ to +70℃ Storage temperature -40℃ to +85℃ Ambient Relative Humidity 5% to 95% (non-condensing) |
| Quality Assurance | MTBF 50000hrs Warranty 5 years |
| Approvals | CE |
| Standard | DL/T 1100.1-2009 IEC 60068-2-78 IEC 61000-4-2 IEC 61000-4-4 IEC 61000-4-5 IEC 61000-4-8 IEC 61000-4-9 IEC 61000-4-10 IEC 61000-4-12 |
