SICOM2024M is a Layer 2 managed ethernet switch supports up to 2x100Base-X SFP and 24x100Mbps RJ45. SICOM2024M is designed to operate reliably in electrically harsh and climatically demanding utility substation and industrial environments.
| Software Functions | ||
| Switching Function | Supports VLAN and PVLAN. Supports GVRP. Supports port aggregation. Supports flow control. Supports port rate limit. Supports broadcast storm suppression. |
|
| Redundancy Protocol | Supports DT-Ring, DT-Ring+, and DT-VLAN and the recovery time<50 ms Supports STP/RSTP |
|
| Multicast Protocol | Supports IGMP snooping Supports GMRP Supports static multicast |
|
| Security | Support port isolate | |
| Service Quality Management | Supports ACL Supports 802.1p (CoS), DSCP Supports SP and WRR queuing |
|
| Management & Maintenance | upports Console, Telnet, and Web management methods. Supports SNMPv1/v2c and can managed by Kyvision. Supports software update over FTP. Supports IP/MAC address conflict alarm, Memory/CPU usage alarm, Power alarm, Port alarm, Port traffic alarm, CRC error and packet lose alarm, SFP port RX power alarm and TX power alarm, Ring alarm. Supports DDM (SFP port). Supports loop detection. Supports CRC protection. Supports RMON. Supports port mirroring. Supports Syslog. Supports LLDP. Supports Link-check |
|
| IP Address Management |
Supports DHCP server/client Supports ARP |
|
| Clock Management | Supports SNTP Server/Client | |
| Product Specifications | ||
| Standard | IEEE 802.3i (10Base-T) IEEE 802.3u (100Base-TX and 100Base-FX) IEEE 802.3x (flow control) IEEE 802.1p (priority) IEEE 802.1Q (VLAN) IEEE 802.1w (RSTP) |
|
| Switch Properties | Priority queue: 4 Number of VLANs: 256 VLAN ID: 1–4093 Number of multicast groups: 256 MAC table: 8K Packet buffer: 2Mbit Packet forwarding rate: 7.7Mpps Switching delay: <10μs |
|
| Interface | Fast Ethernet ports: 100Base-X, SFP port 10/100Base-T(X), RJ45 port Console port: RS232, RJ45 Alarm contact: 3-pin 5.08mm-spacing plug-in terminal block, 250 VAC/220 VDC Max, 2 A Max, 60 W Max |
|
| LED | LED on front panel Running LED: Run Power LED: PWR1, PWR2 Port LED: Link/ACT, Speed LED on rear panel Interface LED: Link/ACT, Speed (RJ45 port); Link/ACT(Fiber port) |
|
| Power Requirements | Power input: 24-48VDC(18-72VDC) 100-240VAC,50/60Hz;110-220VDC (85-264VAC/77-300VDC) Power terminal: 5-pin 5.08 mm-spacing plug-in terminal block Power consumption:<16.8W Overload protection: Support Reverse connection protection: Support Redundancy protection: Support |
|
| Physical Characteristics | Housing: Metal Cooling: Natural cooling, fanless Protection Class: IP40 Dimensions (WxHxD): 482.6mm×44mm×185mm Weight: 2.5Kg Mounting: 19 inch 1U rack mounting |
|
| Environmental Limits | Operating temperature: -40°C to +85°C Storage temperature: -40°C to +85°C Ambient Relative Humidity: 5% - 95% (non-condensing) |
|
| Quality Assurance | MTBF: 338566 hrs Warranty: 5 years |
|
| Approvals | CE, FCC | |
| Industry Standard | EMI: FCC CFR47 Part 15,EN55022/CISPR22,Class A EMS: IEC61000-4-2(ESD) ±8kV(contact),±15kV(air) IEC61000-4-3(RS) 10V/m(80MHz-2GHz) IEC61000-4-4(EFT) Power Port:±4kV;Data Port:±2kV IEC61000-4-5(Surge) Power Port:±2kV/DM,±4kV/CM;Data Port:±2kV IEC61000-4-6(CS) 3V(10kHz-150kHz);10V(150kHz-80MHz) IEC61000-4-8(power frequency magnetic field) 100A/m(cont.),1000A/m(1s-3s) IEC61000-4-9(pulsed magnetic field) 1000A/m IEC61000-4-10(damped oscillation) 100A/m IEC61000-4-12(oscillatory wave) 2.5kV/CM,1kV/DM IEC61000-4-16(common mode conduction) 30V(cont.),300V(1s) Machinery: IEC60068-2-6 (vibration), IEC60068-2-27 (shock), IEC60068-2-32 (free fall) |
